News
February 2014 - RCPlive version 1.3 released.
Version 1.3 brings in several security enhancements and bug fixes. The release is based on:
- Debian 7.4 "wheezy"
- Linux kernel 3.2.54
- RCP100 1.1-test1
Security enhancements for telnet and http access:
- Running the CLI session in a chroot jail.
- Limiting TCP SYN packets to 20 per second.
- Limiting ICMP request packets to 20 per second.
- Introducing a 2 second login session delay if the login fails.
- Dictionary attack detection. Login attempts are logged, and the host trying to access the router is banned for one minute after 6 failed logins in one minute.
Bug fixes:
- Cleaning nat and mangle tables during netfilter initialization.
January 2014 - RCPlive version 1.2 released.
This version is based on Debian 7 "wheezy" and RCP100 version 1.0.
January 2014 - RCP100 version 1.0 released.
This is the first stable version of the software.
- HTTP configurator enhancements.
- MAC address filtering.
- bug fixes
December 2013 - RCPlive version 1.1 released.
- Debian 7 "wheezy"
- Linux kernel 3.2
- RCP100 version 1.0-beta2
November 2013 - RCPlive version 1.0 released.
- Debian 7 "wheezy"
- Linux kernel 3.2
- RCP100 version 0.99.6
October 2013 - Version 0.99.6 released.
- Merged LiveCD support from RCPlive project
- VLAN interface support
- bug fixes
September 2013 - Version 0.99.5 released.
- DHCP static leases
- Firewall port forwarding
- bug fixes
June 2013 - Version 0.99.4 released.
- bug fixes
May 2013 - Version 0.99.3 released.
- DHCP server
- Login banner support
- bug fixes
February 2013 - Version 0.99.2 released.
- SNMP logging (RFC 5676)
- SNMP statistics
- HTTP configuration
- bug fixes
January 2013 - Version 0.99.1 released.
- bug fixes
January 2013 - Version 0.99 released.
- RIP/OSPF route redistribution
- OSPF SNMP traps
- DNS proxy security enhancements
- Network monitoring features
- HTTP interface
- bug fixes
November 2012 - Version 0.98.3 released.
- ACL ICMP support
- OSPF MTU support
- OSPF passive interface
- OSPF LSA summarization
- OSPF show commands
- bug fixes
October 2012 - Version 0.98.2 released.
- Bug-fix release.
September 2012 - Version 0.98.1 released.
- SNMP v1, v2c, v3
- loopback interfaces
- redistribution of loopback addresses into RIP and OSPF
- Equal Cost Multipath support for RIP and OSPF
- ACL enhancements
- Masquerade NAT
- bug fixes
August 2012 - Version 0.98 released.
- First beta release.